Repairs
Experience expert violin repair from the comfort of your home with our dedicated online service. Whether you’re dealing with a cracked top, loose pegs, or a dull tone, our skilled technicians are here to help. Simply send us a few details about the issue and email clear images of your violin. Our professionals will assess the problem and provide a detailed repair plan and estimate. Estimates will be finalized when one of our luthiers can examine the instrument in person.
We use only high-quality materials and follow precise techniques to ensure your violin is restored to its optimal condition. From minor adjustments to major repairs, we handle each instrument with the utmost care and expertise.
Enjoy the convenience of top-notch repair services without leaving your house. Let us bring your violin back to its best, so you can continue making beautiful music.
Email info@hfmeyermusic.com to begin your quotation!
Setup & Adjustments
As professional musicians, we understand the difference a properly setup instrument can make. Violinists travel far and wide to visit our workshop and have their instrument set up by our team of luthiers. Our luthiers are not only extraordinary technicians, but they are also talented musicians and will bring the most out of your instrument.
SERVICES |
VIOLIN / VIOLA |
CELLO |
New student bridge |
$90.00 |
$200.00 |
A good quality bridge carved by hand, minimal aesthetic carving, includes Aubert "Made in France" blank |
||
New professional bridge |
$150.00 |
$350.00 |
Highest quality bridge carved by hand, including artistic and acoustic carving, includes Aubert Luxe blank. Aubert Deluxe Blank for an additional $40.00. |
||
Peg installation |
$112.50 |
$150.00 |
Cost of pegs not included, all 4 pegs |
||
New soundpost, regular |
$40.00 |
$75.00 |
Includes adjustment when the instrument is picked up |
||
New soundpost, deluxe |
$60.00 |
$90.00 |
Includes adjustment when the instrument is picked up |
||
End-button / endpin |
$35.00 |
$80.00 |
Replacement of end-button/endpin (cost of product not included), does not include bushing. |
||
General adjustment |
$75.00 / HOUR |
$75.00 / HOUR |
Hourly quotes are based on extensive experience with all repairs and services, and are subject to change while services are underway. |
Fingerboard & Neck Adjustments
Over time, the fingerboard and neck on your stringed instrument might wear down, lose its projection or change due to climate. Our luthiers are masters at getting the neck and fingerboard back to perfect condition. A properly shaped fingerboard and neck will enhance playability and tone tremendously.
SERVICES |
VIOLIN / VIOLA |
CELLO |
Fingerboard re-glue |
$60.00 |
$90.00 |
Includes cleaning & preparing the gluing surfaces, aligning & gluing fingerboard |
||
Basic Fingerboard Dressing |
$55.00 |
$75.00 |
Using a scraper to remove small bumps from wear & tear |
||
Full Fingerboard Dressing |
$150.00 |
$225.00 |
Remove the nut and use a plane to resurface the entire fingerboard, finishing with a scraper to be perfectly smooth |
||
Fingerboard replacement |
$300.00 |
$500.00 |
Craft a new fingerboard from an ebony blank, includes replacement nut |
||
Fingerboard Replacement - Ebony Alternative |
$250.00 |
$475.00 |
Craft a new fingerboard from an ebony alternative with matching replacement nut |
||
Neck adjustment (neck shim) |
$75.00 / HOUR |
$75.00 / HOUR |
This work generally takes 2 to 3 hours, but every instrument is different, evaluation is necessary. This shim can only add a few millimeters of projection. |
||
Full neck reset |
FROM $450.00 |
FROM $600.00 |
For fixing the neck angle. Remove the neck, adjust the joint or add material as needed, align and re-glue the neck |
Repair & Restorations
Our full-service workshop is set up to do the most challenging repairs. We offer all external and internal repairs, including cosmetic work. When it comes to your instrument, you want to work with the best.
SERVICE |
VIOLIN / VIOLA |
CELLO |
Basic cleaning |
$45.00 |
$45.00 |
Remove rosin, dust, and grime from the outside of the instrument |
||
Deep cleaning |
$75.00 |
$150.00 |
Remove & clean accessories (chinrest, tailpiece, strings & bridge), thoroughly clean & polish the instrument, reinstall everything. This is a good time for a string change! |
||
Nut replacement |
$75.00 |
$150.00 |
Remove the old nut, craft a new one from a blank piece of quality ebony, glue and finish to perfection. Usually 1 to 2 hours of work |
||
Saddle repair |
$45.00 |
$95.00 |
If the saddle has come loose, the area usually needs to be cleaned before reinstalling the saddle |
||
Saddle replacement |
$120.00 |
$175.00 |
Remove the old saddle, clean the area, craft a new saddle and adjust to perfection |
||
4 Peg bushing |
$450.00 |
$525.00 |
Drill peg holes and fill with new wood, drill new peg holes, ream to the proper diameter, retouch varnish to match. Requires fitting new pegs (not included) |
||
Open seams |
$75.00 / HOUR |
$75.00 / HOUR |
Usually takes ½ to 2 hours, every instrument is different |
||
Gluing / restoration |
$75.00 / HOUR |
$75.00 / HOUR |
Example: repair corners or edges, scroll patches, damage to ribs. Every instrument will be different |
||
Varnish work |
$75.00 / HOUR |
$75.00 / HOUR |
From simple varnish touch-ups to complete re-varnishing |
||
Crack repair |
$75.00 / HOUR |
$75.00 / HOUR |
There are many factors, such as if the top needs to be removed, previous repairs, the severity of crack, and varnish work |
||
Top-plate soundpost crack |
FROM $750.00 |
FROM $1125.00 |
Requires removing the top, making a plaster mold, gluing the crack, crafting & fitting the reinforcing patch, cutting the patch to the proper thickness, and re-gluing the top. Requires a new soundpost (not included) |
||
Top plate bass bar crack |
FROM $975.00 |
FROM $1450.00 |
Requires removing the top, making a plaster mold, gluing the crack, crafting & fitting the reinforcing patch, cutting the patch to the proper thickness, making a new bass bar, and re-gluing the top. May require a new soundpost (not included) |
||
Back plate soundpost crack |
FROM $975.00 |
FROM $1450.00 |
Requires removing the back, making plaster mold, gluing the crack, crafting & fitting the reinforcing patch, cutting the patch to the proper thickness and re-gluing the top. May require a new soundpost (not included) |